My shopping cart
Your cart is currently empty.
Continue ShoppingCopy of HACKER - SECRET (ne pas toucher)
WAIT UNTIL THE END OF THE WEEK, AN UPDATE WILL FIX ALL OF THE ISSUES WE FOUND THE LAST DAYS
App address: http://magic.hacker or 192.168.4.1 (only works when the device is connected)
CAREFULLY WATCH THE EXPLANATION VIDEO!
CHAPTERS
ALL YOUR PROBLEMS ARE SOLVED BY FOLLOWING THESE 8 STEPS.
8 STEPS
8 STEPS for Windows (click here)
.
1- Turn off your device and connect it to your computer.
2- Download the 2 files below: the FLASHER + DRIVER and the UPDATE V() located underneath.
3- Unzip the ZIP file and open the FLASHER.
4- Launch the FLASHER.
5- After opening the FLASHER, choose the COM port that corresponds to the device's port.
6- Click on Browse and select the HACKER_V( ).bin file.
7- Click on "Flash ESP" and wait about 1 minute for the program to finish sending.
8- Once done, disconnect your device, try reconnecting to the WIFI, and navigate to the IP address 192.168.4.1
8 STEPS for MacOS (click here)
.
1- Turn off your device and connect it to your computer.
2- Download the 2 files below: the FLASHER + DRIVER and the UPDATE V() located underneath.
3- Unzip the ZIP file and open the FLASHER. The Flasher will launch. Your computer might notify you that the software is not authorized. If this happens, click "OK", navigate to "System Settings", then "Privacy & Security", and click "Open Anyway".
4- Launch the FLASHER.
5- After opening the FLASHER, choose the COM port that corresponds to the device's port.
6- Click on Browse and select the HACKER_V( ).bin file.
7- Click on "Flash ESP" and wait about 1 minute for the program to finish sending.
8- Once done, disconnect your device, try reconnecting to the WIFI, and navigate to the IP address 192.168.4.1
FAQ
Before it was working, but why do I now have a blank page?
Check if you're connected to the wifi named “WIFI”. If yes, maybe your Android want you to turn off your cellular connection (3g - 4g - 5g) to make it appear.
I have a very strange interface with a lot of display problems.
If your interface looks like this, or your device doesn't vibrate, or the light button doesn't turn blue or you have any similar issue, 95% of the issues are solved by following the 8 STEPS above the FAQ. Try it, it should fix it.
My device is not recognized by my computer when I follow the 8 STEPS, why ?
Be sure you used the cable provided with HACKER. If it's the case, try to plug the cable in another port, close the software, and open it again, it should resolve the port issue.
Why can't I see more than 5 wifi networks on my phone?
It depends on the phone. Sometimes a spectator's phone will display 3 wifi networks, sometimes 20, sometimes 50, sometimes 100. It varies depending on the age of the phone and whether it has internal wifi security or not. This can't be controlled, but the impact on the spectator remains the same.
How long do I need to charge it ?
It takes around 4/5 hours the first time to charge it fully. After that initial charge, it only takes a few hours.
My spectator can't see any wifi networks!
Always ensure you have at least two people checking at the same time! The more you have, the better. This way, you're sure that at least one of the two spectator phones will see the networks appearing. Some phones have internal issues that we cannot control.
I don't have an Emergency button! Why?
In Android Mode, the button is OK. Because the EMERGENCY button is only found on the iPhone interface.
My problem is not here, what to do ?
Send us an email at contact@lesfrenchtwins.com and explain us your exact issue with HACKER, but before, be sure it's not in the explanation video or in the FAQ please.